Since we're not Kenwood geeks the Repeater-Builder staff can't take responsibility for the accuracy. All we did was clean up the formatting and convert it into HTML for the web. Kenwood Programming Information Kenwood Land Mobile Radio Programming Information Compiled by Mike Morris WA6ILQ The three tables below were received as two anonymous emails in December of 2008. Output power, if not measured with a peak reading wattmeter will bounce to about 80W on voice peaks. If your microphone is defective, or your MIC GAIN control is fully counter clockwise, you will get no output power when you speak into the mic. Or you need to know how to install the software. Is the serial # of the software you need.give me some more info. Need info for download software on PC.Need User,Company info. Kenwood KPG-49D RSS (v4.0) Programming Software. This is because the RF Carrier is modulated by your voice, and when speaking into the mic, the voice peaks will increase the output to about 80W if not measured with a peak reading wattmeter. This is the RF Carrier required for the AM Mode.
AM will only give to about 40W without modulation.
